- With variable pivot point of 55/65mm
- With clip on covers
- Bolts from opposite sides make unauthorized removal virtually impossible.
- To accept the Pivot of OPF-1, OCPF-1 or OFS-ACC-GDP
- Door held by friction grip
- No need of glass preparation
- Gives more strength and rigidity to the door structure.
- Finish: SSS clip on cover
- Available sizes in 1mtr. & 1.5mtr.
-
Top Rail -
Bottom Rail- With variable pivot point of 55/65mm
- With clip on covers
- Bolts from opposite sides make unauthorized removal virtually impossible.
- To accept the Spindle of Ozone floor springs
- Door held by friction grip
- No need of glass preparation
- Gives more strength and rigidity to the door structure.
- Comes with in-built lock with a euro profile cylinder
- Finish: SSS clip on cover
- Available sizes in 1mtr & 1.5mtr.
-
Stainless Steel Pivot- Top pivot with 15mm diameter pin
- Wear resistant SS 304 pivot pin
- Pivot held in overhead structure
- Material:-Stainless Steel Grade-304
- Finish:- SSS
-
Glass Door Handle D Type- Pull Handle With Back to Back installation on Glass/Wooden/Metals Doors.
- In case of Wooden Exteneded Spindle would be provided on request.
- Gaskets to prevent the contact between glass and metal.
- Supporting washer with raised bevelling on the outer surface
- Grub screws kept out of sight
- Material:-Stainless Steel Grade 304
- Finish: Double Finish of PSS/SSS & Single Finish of SSS
-
Glass Door Handle H Type- Pull Handle With Back to Back installation on Glass/Wooden/Metals Doors.
- In case of Wooden Exteneded Spindle would be provided on request.
- Gaskets to prevent the contact between glass and metal.
- Supporting washer with raised bevelling on the outer surface.
- Grub screws kept out of sight.
- Material:-Stainless Steel Grade 304.
- Finish: Double Finish of PSS/SSS & Single Finish of SSS
-
Glass Door Handle S Type- Pull Handle With Back to Back installation on Glass Doors.
- Gaskets to prevent the contact between glass and metal.
- Supporting washer with raised bevelling on the outer surface.
- Grub screws kept out of sight
- Material:-Stainless Steel Grade 304.
- Finish: Double Finish of PSS/SSS & Single Finish of SSS
-
Glass Door Handle- Rectangular section Pull Handle With Back to Back installation on Glass/Wooden/Metals Doors.
- In case of Wooden Exteneded Spindle would be provided on request.
- Gaskets to prevent the contact between glass and metal.
- Two sizes to choose from: OGH-554-ED-20x40x400 OGH-554-ED-20x40x800
- Material:-Stainless Steel Grade 304
- Finish: SSS
-
Glass Wedge System- Attached with ceiling, floor or wall
- Available in lengths of 2mtr. or 3mtr.
- Base section with provision to attach to fixed structure at 300mm interval
- Glass held at every 300mm with clamping shoes
- Do not require any glass preparation
- Easy and simple installation of the glass
- Low maintenance cost
- High aesthetics value
- Highly cost effective
- Fast completion of projects can be achieved
- Finish: SSS clip on cover
- End cap for better aesthetics
-
Glass Wedge System- Attached with ceiling,floor or wall
- Available in lengths of 2mtr. or 3mtr.
- Do not require any glass preparation
- Easy and simple installation of the glass
- Low maintenance cost
- High aesthetics value
- Highly cost effective
- Fast completion of projects can be achieved
- Finish: Anodised & SSS
- End cap for better aesthetics
-
Over Panel Patch Secured on to the Sidewall with Pivot- With SS 304 cover
- Pivot pin of 15mm diameter
- Cover secured with small ‘L’ key
- Base Material Casting:-Aluminium Alloy
- Finish: SSS
-
Wall to Glass Connector- No Projection for Glass
- Counter Sunk Hole
- Stainless Steel Grade 304
-
Floor/Ceiling to Glass Connector 90°(Fixed)- Firm grip
- Adjustable within +2.5mm
- No projection from glass
- Stainless Steel Grade 304
- Also available without CSK Head
-
Strike Box For OPL-2A- Strike box to Accept the dead bolt of OPL-2A
- With SS 304 cover
- Base Material Casting:-Aluminium Alloy
- Cover secured with small ‘L’ key
- Finish: SSS
-
Strike Box for OPL-3A- To accept lever of OPL-3A
- With SS 304 cover
- Base Material Casting:-Aluminium Alloy
- Cover secured with small ‘L’ key
- Finish: SSS
-
Door Stopper- Attached to ceiling or floor
- Rubber stopper to prevent damage to the door
- Stainless Steel Grade 304
- Finish:-SSS
-
Corner Patch Lock with Strike Plate- With a Euro profile cylinder and strike plate
- Dead bolt projection of 15mm (single throw)
- To lock the door at centre/floor
- Three high security computer keys
- With SS 304 cover
- Cover secured with small ‘L’ key
- Finish: PSS
-
One Side Corner Lock with Strike Plate- Thumb turn knob for single side locking
- To lock the door at centre/floor
- With SS 304 cover
- Cover secured with small ‘L’ key
- Finish:PSS
-
Wall to Glass Connector for Canopy- Threaded portion to adjust the height
- Teflon washers to prevent damage to the glass
- Firm base to have a secure seating
- Flat head bolt
- Stainless Steel Grade 316
-
Wall to Glass Connector for Canopies- Adjustable in angle and distance
- Firm base to have a secure seating
- Allows gradient for canopies
- Teflon washers to prevent damage to the glass
- Flat head bolt
- Stainless Steel Grade 316
- Suitable for small canopies in interior/exterior application
-
Glass Connector for Canopy- To be used with OCF-03 with a Cable or Rod
- Length adjustable
- More gripping surface
- Flat head bolt
- Stainless Steel Grade 316
-
Glass Connector for Canopies- Adjustable in nature
- To be used with OCF-03-S
- Allows gradient for canopies
- Teflon washers to prevent damage to the glass
- Flat head bolt
- Stainless Steel Grade 316
-
Glass Connector for Canopy- To be used with OCF-02 with a Cable or Rod
- More gripping surface
- Firm base to have a secure seating
- Suitable for a canopy of 2mx2m with two pairs
- Stainless Steel Grade 316
-
Cable/Rod Connector for OCF-02 OR OCF-03- To be used with OCF-02/03 with a Cable or Rod
- Recommended with 16mm connecting rod
- Stainless Steel Grade 316
